Description
Features
A unique earth ground tester that performs testing with and without stakes
Tests 3- and 4-pole fall-of-potential, and 4-pole soil resistivity (with stakes)
Performs selective earth ground rod testing (one clamp + stakes)
Performs stakeless earth ground rod testing (two clamps)
Features Automatic Frequency Control (AFC) to minimize the effect of interference
Product overview: Fluke 1625-2 GEO Earth Ground Tester
Fluke 1625-2 Earth Ground Tester offers fast, accurate earth ground testing using all four test methods.
The Fluke 1625-2 earth ground tester measures earth ground loop resistances using only clamps, only stakes,
or one clamp and stakes. With the stakeless test method, the Fluke 1625-2 is able to measure earth ground
loop resistances for multi-grounded systems using only current clamps. This technique eliminates the dangerous,
and time consuming job of disconnecting parallel grounds, and finding suitable locations for auxiliary ground stakes.
This allows you to perform earth ground tests in places you’ve not considered before, such as inside buildings,
on power pylons, or anywhere you don’t have access to soil.
Keep your options open
If a bonded earth ground system does not exist for the building or structure under test, and there is only one
path to ground, you can use the 1625-2 to perform the fall-of-potential test method with stakes.
The 1625-2 offers other advanced features including:
Automatic Frequency Control to identify existing interference and choose a measurement frequency to minimise its effect,
thus providing a more accurate earth ground value.
R* measurement that calculates earth ground impedance at 55 Hz to more accurately reflect
the earth ground resistance that a fault-to earth ground would see.
96.
Fluke P3031/P3032 Conversion Weight Sets – Calibration Equipment Pressure us 2624
Conversion weight sets allow deadweight testers to calibrate in different pressure units without need to perform conversion calculations
Weight sets are adjusted to correct mass for use with existing piston
Includes replacement low-pressure weight carrier table and replacement high-pressure weight carrier ring
For use with Model P3031 psi
Note: We will need to know instrument serial number that this product will be matched with
Reviews
There are no reviews yet.